中文
旗帜条幅
Product Quality Guarantee and Disclaimer
Since its establishment, our company has maintained a rigorous and responsible attitude in providing each client with comprehensive services from consultation to after-sales support. To facilitate your understanding of our company and uphold our commitment to product quality responsibility, we hereby publish the printed product quality guarantee and disclaimer as follows:
After-Sales Service Timeliness
Please inspect the goods promptly upon receipt for any quality issues and submit an after-sales request within one month. After-sales requests submitted beyond one month will not be processed. Thank you for your understanding!
Color Deviation Issues
- Printing uses CMYK four-color offset printing. Please do not use RGB mode or spot colors when filling colors. Do not require printing colors based on screen or printed proof colors. When designing, please refer to color chart values for color fills. Otherwise, after-sales service will not be provided for resulting color deviations.
- We strictly adhere to the CMYK color values in the file for printing. However, for the same printed product with different order numbers or produced in different batches, a color deviation of around 10% is normal due to variations in temperature, humidity, and manual operations. Particularly for dark blue, dark green, dark purple, maroon, brown, coffee, and gray — these are considered risky colors. A color deviation of around 5% can be visually noticeable, especially for large solid areas and flat tints. During printing, issues like ink streaks, uneven printing, or color variations within a batch may occur and are unavoidable. After-sales service will not be provided for issues within this range.
Cutting Issues
There is a cutting tolerance of 2 millimeters. Design essential content at least 3 millimeters away from the finished edge (excluding bleed). Especially for designs with colored borders on all sides, uneven cutting may occur and be visually noticeable. Please inform the client in advance. After-sales service will not be provided for issues within this range.
Four-Color Black Text and QR Code Issues
Please design black text and QR codes as solid black (K100, CMY 0). For large-area black, use the color value (K100, C30, M0, Y0). Do not design with four-color black, as it may cause ink smearing and misregistration issues. After-sales service will not be provided if these instructions are not followed.
Filename and Remarks Issues
Order production is based on the selected printing specifications. Filenames and remark information are not used as references for production. Please ensure the correct paper and processes are selected when placing the order. Otherwise, after-sales service will not be provided for resulting losses.
Minor Scratch Issues
PVC cards require a lamination process to achieve glossy, matte, or satin finishes. The post-production involves multiple steps, and friction during transportation can cause minor scratches. Glossy materials do not conceal imperfections; minor scratches on glossy cards are unavoidable, and after-sales service will not be provided. If the client has high requirements, we recommend using matte or satin materials.
Missing Codes and Number Gaps
PVC card production involves many processes. Numbering has a 0.5% wastage rate, and machine numbering may occasionally skip numbers. Therefore, we cannot guarantee that numbers will be completely sequential and continuous. For missing codes, after-sales service will not be provided.
Material Variation Issues
PVC is a plastic product. Material thickness may vary by about 0.02mm between different batches, and color may slightly differ. These are normal phenomena; please inform the client in advance. When thickness exceeds 0.5mm, cards require lamination to be finished. Influenced by factors such as temperature, humidity, surface material, and core material thickness tolerance, cards may have slight unevenness. This is unavoidable, and after-sales service will not be provided. Due to the special properties of the material, the finished product is not guaranteed to be suitable for secondary overprinting. After-sales service will not be provided for such issues.
Regarding Sunlight Resistance
PVC specialty cards are printed using CMYK four-color offset printing, resulting in a relatively thin ink layer. Ultraviolet (UV) rays or rainwater can damage ink stability. Fading will occur faster under strong UV light or frequent rain. If the client requires color sunfastness, we recommend selecting sunlight-resistant ink when placing the order. The sunlight-resistant ink we use has a grade 6 sunfastness rating, and its effectiveness generally lasts 1-3 months.
Regarding Environmental Testing
The following materials require core material lamination and currently do not support environmental testing: 0.32mm matte standard material, 0.76mm glossy new material, 0.76mm matte new material, 0.76mm satin new material, 1mm glossy new material, 1mm matte new material, 1mm satin new material. If the client has high requirements and needs to meet environmental testing standards, please consult our staff separately for calculation and arrangement.
Regarding Ink Smearing Issues
PVC production involves many processes, and there is a certain probability of slight surface dust or ink smearing, especially with glossy materials. For high-demand dark or solid-color cards, achieving zero defects is currently not possible. We recommend informing your client of this situation in advance and合理安排 material and order planning accordingly.
PVC异形卡
产品效果
PRODUCT
Glossy Card
Surface smooth, colors bright and rich, affordable price, wide
[Thickness] 0.38mm, 0.76mm, 1mm
Matte Card
Smooth and delicate, no reflection, it is recommended
to use matte card + sunscreen ink printing
outdoor use [Thickness] 0.38mm
Warm Reminder
Recommended above common thicknesses. If you have other thickness requirements, please consult the manual
order take: There will be a slight error in the thickness after the physical lamination, please be informed. All materials are
guaranteed to be new materials, which have better color reduction, stronger toughness and longer durability.
产品工艺
PRODUCT PROCESS
Frosted Card
Frosted texture, granular feel to the touch, scratch-resistant.
[Thickness] 0.38mm
背胶：
常做单面印刷单面贴胶，也可双面印刷单面背胶，双面印刷背胶的卡片建议选用0.76mm厚度更佳。胶性较强，防水防油，常应用于桌贴，推拉贴，标示提示等。背胶建议张贴在干净、无脏污的环境。因PVC本身有一定韧性，建议张贴在光滑、平整、不弯曲的张贴物上。
折弯：
通过加热将PVC折成需要的角度，然后冷却成型。加热以后可以折弯成L型，常做折弯角度：倾斜75度/80度（价格宣传签使用较多）或者90度（酒箱内卡酒签使用较多）。
打孔：
常做圆孔4mm、5mm、6mm、扁孔15×3mm，孔最小3mm。如客户需要其他尺寸孔时，下单文件里面请提示标明尺寸，注意孔的尺寸只能是整数mm，如4mm，打孔不另加费用。因孔位较小，PVC卡片韧性较大模切压力切不掉废边，出货默认不排废，请悉知。
防晒油墨：
如卡片是户外使用，可建议客户选用防晒油墨更佳。
Precautions
PRECAUTIONS
I. Size Design:
If the product is non-rectangular, a die line needs to be designed, and 3mm bleed should be added to each side. After bleeding, the content should be at least 6mm away from the edge. If punching holes, the hole positions should also be at least 6mm away from the edge, and the distance between the hole and the surrounding text should be at least 3mm.
II. Color Control:
The production file needs to be in CMYK color mode, and spot color printing is not supported. Color adjustment design can be referred to the color spectrum. By default, there will be a color difference of about 10%-15% for combined printing. For black background, it is recommended to design as C30 M0 Y0 K100 or single black, and for gray background, design as single gray. It is not recommended to design large areas of overly dark colors. The sum of CMYK should be less than 260 to avoid multi-color or color deviation on one card.
III. Common File Issues:
Vector tracing (CDR/AI), PS, JPG (resolution greater than 500) files. Vector text is recommended to be above size 5, JPG format is recommended to be above size 6. Black text must be designed as single black. QR codes should be designed to be above 2CM and single black. When the single side size is less than 80mm, the finished product is prone to interface or die-cutting errors. Please inform the customer in advance according to the customer's situation!
IV. Self-service Ordering:
Please be sure to determine the quantity, material, and post-processing requirements before uploading. If the front and back of the file are the same, please submit the back file together. If there are multiple styles with the same back, only one back file needs to be placed, and the back file should be named as "same back". Place the front and back left and right. If double-sided printing with single-sided adhesive is required, please select the side that needs adhesive and mark it clearly in the file.
PVC Category - PVC Special-shaped Card Product Ordering Instructions
Dear Customer:
PVC special-shaped cards are processed automatically. To improve efficiency for both of us, please abide by the following rules!
I. JPG Punching Standards
The default size of the flat hole is 15*3mm. The diameter of the round hole is usually 4mm and can only be an integer mm, and the distance from the hole to the edge should be at least 3mm. If you need to make punching with special sizes, please be sure to upload the punching diagram of the original large file.
II. Double-sided Adhesive Standard
Please be sure to mark the adhesive side in the file or upload the adhesive diagram for double-sided adhesive.
III. Front and Back Relationship Standard
- If both sides are the same, a copy of the file is needed, and the front and back shapes should be symmetrical;
- Pay attention to the symmetry of the front and back shapes for double-sided printing.
IV. Bending Card Registration Standard
- The unfolded size for bending card registration needs to include the base bending part;
- The bending height requires that the picture is 1/3 of the size, too small and it will be unstable;
- There is a 3mm error in the bending position. The important content should be at least 3mm away from the bending line to avoid folding the content.
V. Standards for Merging Files
VI. Design Warnings
- 黑色和灰色
- a、黑色文字：
AI/PDF/CDR文件：黑色文字色值C0 M0 Y0 K100，
JPG文件：黑色文字色值C0 M0 Y0 K100，无描边颜色模式正片叠底，如有描边颜色模式正常。 - b、大面积黑色底色：C0 M0 Y0 K100，如想要更黑推荐色值C30 M0 Y0 K100；
- c、灰色文字和灰色底色设计单色灰，C0 M0 Y0 K (8-90) 。
- a、黑色文字：
- 二维码
二维码是按您设计的文件直接印的不做后工,二维码建议设计单黑且尺寸需≥14mm,如果您的二维码过小或者四色的出来会扫描不了。
二维码四色改单黑可以在PSD软件中按下列步骤操作：
使用PSD打开二维码→编辑→转换为配置文件→目标空间，配置文件选择 “自定CMYK”, 其他不用更改点确定，弹出来的窗口点确定→自定CMYK，黑版产生选 “最大值”，油墨总量限制输入 “400”，点确定→在信息面板看下二维码是不是单黑。（下图是具体设置,可参考一下，可设置成动作方便下次操作）
- Black and Gray
- Black text:
For AI/PDF/CDR files: Black text color value C0 M0 Y0 K100,
For JPG files: Black text color value C0 M0 Y0 K100, normal mode for non-stroke color, normal mode for stroke color if any. - Large area black background: C0 M0 Y0 K100, if you want it darker, recommended color value C30 M0 Y0 K100;
- Gray text and gray background design single-color gray, C0 M0 Y0 K (8-90).
- Black text:
- QR Code
The QR code is printed directly according to your designed file without post-processing. The QR code is recommended to be designed in single black and the size should be ≥14mm. If your QR code is too small or in four colors, it may not be scanned.
To change the four-color black of the QR code to single black, you can operate in the following steps in the PSD software:
Open the QR code with PSD → Edit → Convert to Profile → Destination Space, select "Custom CMYK" for the profile, no other changes, click OK, click OK in the popped-up window → Custom CMYK, select "Maximum" for black point generation, enter "400" for ink total limit, click OK → Check in the information panel whether the QR code is in single black. (The following is the specific setting, for reference, you can set it as an action for easy operation next time)
03. Dangerous Colors and Design Color Notes
Containing C color
High C color value
Four-Color Black
- The above figure lists some dangerous colors. When printing these colors, ink streaks will occur and the color difference is obvious. These problems are phenomena that are difficult to avoid in printing. In order to ensure that you can deliver on time, please inform the customer in advance. It is recommended that the sum of CMYK four colors ≤ 250.
- On PVC, if the individual color values of the four colors CMK are more than 8, and Y is more than 15, if the color is too light, it will lead to the color being too light to be printed out.
- Please design CMYK four colors for the color. Do not design spot colors and RGB colors. If the color of your file is not CMYK color, there will be changes if we directly change the color.
- Some common color recommended color values:
- Yellow series: C=0. If you want the color to be darker, you can add K to darken the color. If the yellow series in your file contains C cyan, the color will come out greenish and dark. For example:C0 M30 Y90 K10
- Blue: It is recommended that the M color value < 80. For example:C100 M70 Y0 K0
- Purple: It is recommended that the C color value < 75. For example:C70 M100 Y0 K0
- Dark red: C=0, K≤60. For example:C0 M100 Y100 K30
- Dark green: M=0, K≤60. For example:C100 M0 Y100 K40
- Dark blue: Y=0, K≤50. For example:C100 M75 Y0 K40
- Dark purple: Y=0, K≤50. For example:C60 M100 Y0 K40
- Brown: Do not have all four CMYK colors. For example:C0 M80 Y100 K60
- Yellow series: C=0. If you want the color to be darker, you can add K to darken the color. If the yellow series in your file contains C cyan, the color will come out greenish and dark. For example:
04. In order to ensure the printing effect, it is recommended that the file be sent as a vector file (CDR/AI), JPG (JPG image with a resolution of more than 500).
